4.2
Revised 07/12/11
CHECKING THE STATUS OF THE
AUTOMATIC TIMER
(WHAT TIME IS SET?)
To view these times whatever the current operating
mode is, press the SET key and use the arrow keys
to move the cursor to item “3. TIMER”. Press the
ENTER key. Then, highlight any day annotated
with a “>” and press the + key and then ENTER.
The ON and OFF times will be displayed. Use the
EXIT key to return to any previous menu.
If the operating mode is AUTO (AUTO LED is illu-
minated), and the system is in Standby, the following
information will be displayed.
When the instrument is in STANDBY, all heaters are
off and the Cryo module is off. To turn the heaters
on before the next scheduled ON cycle, press the
HEAT Key. To turn the Cryo Module ON, press the
AUTO/MAN key to illuminate the MAN LED, then
press the CRYO key
(NOTE
: The CRYO key can
be pressed to turn the CRYO Module ON even if the
AUTO LED is illuminated if the “2. TIMER OFF”
item was programmed in the SETUP Mode).
AUTOMATIC TIMER (optional use)
<STANDBY>
6:00 PM WED
NEXT ON/OFF CYCLE: 8:00AM –5:00PM TUE
