Revised 07/12/11
2.5
Embedding Module
(CONTROL PANEL)
LCD Display –
consist of two lines of up
to 40 characters per line.
Displays (depending on the mode):
(a) current time of day
(b) On or Off times
(c) current temperatures
(d) actual preset temperatures
(e) actual operating mode
(f) system status information and error condi-
tions
Left and right arrow keys–
move the display
cursor left and right. Rapid scrolling is enabled
by holding these keys for more than 2 seconds.
AUTO/MAN key –
selects between automatic
and manual operation. The corresponding LED
will be lit to indicate the current mode of opera-
tion. Selecting the Manual Mode of operation
does not permanently cancel the automatic timer
On/Off times.
LIGHT key–
turns Work Light ON or OFF.
CRYO key –
turns the Cryo Module ON or OFF.
The independent operation of the CRYO Module
can be restricted if the Automatic Timer has been
programmed to also control the ON and OFF
times of the Cryo Module. Under this condition,
the CRYO key will not operate when the system
operating mode is in AUTO (AUTO LED indica-
tor is ON). See Section 3, SET UP to change the
setting.
NOTE:
Power to the Cryo Module
must be turned on before the Embedding Module
is turned ON.
