2.6
Revised 07/12/11
UNPACKING,
SYSTEM DESCRIPTION
HEAT Key –
turns the heating components of
the Embedding Module ON or OFF.
SET key –
allows operator to enter the SETUP
mode (See Section 3, Set Up).
EXIT key –
allows to return to the previous
menu item without saving the changes made in
the SETUP mode.
+ and – keys –
increase or decrease numerical
values and add or delete days when in the
SETUP mode. Holding these keys for more than
2 seconds enables rapid scrolling.
ENTER key –
when pressed, stores data into
memory in the SETUP mode.
Display Adjustment Wheel –
controls the con-
trast for the display.
