7.
Connection of boom barrier utilities
џ
Before connecting boom barrier, check that cabinet and arm are installed correctly and securely.
џ
Only specialists with appropriate qualifications are allowed to work on connecting of boom barrier
utilities.
џ
Connect utilities of boom barrier with power supply disconnected!
џ
To protect electrical cables from mechanical damage and harmful environmental influences, it is
recommended to lay the cables in a corrugated polyamide pipe with waterproof sealed
connectors.
7.1 Main connection of boom barrier
The control unit is located inside the barrier cabinet.
a) ~230 V power supply cable to be connected:
- Phase (L) to be connected to the circuit breaker;
- Neutral (N) to be connected to terminal ~230V;
- Earth (РЕ) to be connected to earthing terminal (РЕ);
b) Control panel cable to be connected to terminals:
- P (Power) - control panel power 12V;
- G (GND) - common wire of control panel;
- A (RSA) – RSA wire of control panel link;
- B (RSB) - RSB wire of control panel link;
џ
Carefully study the power supply connection diagrams of "Operation Manual. Part II. Wiring and
operation of boom barriers"
џ
The connection must correspond to the wiring diagram shown in the diagram in Appendixes 1-2
of the Operation Manual. Part II. Wiring and operation of boom barriers"
Page
-18-
Size А4
Installation and Operation Manual
Revision 1.0 2021
ROAD BLOCKING SYSTEMS
Office and Production site:
Tel.:
+380 (44) 291-21-11
14 Promyslova str., 02088, Kyiv, Ukraine,
Fax:
+380 (44) 291-21-02
E-mail:
[email protected] www.tiso.global
BOOM BARRIER OPTIMUS
