background image

6.

  Installation of boom barrier

Left version boom barrier

Right version boom barrier 

cabinet door

cabinet door

џ

Arrangement of installation site must comply with requirements of the applicable regulations and 
standards.

џ

Installation area shall be fenced along perimeter with temporary security fencing or  caution tape 
at the distance of 3 meters from the installation site.

џ

The appropriate warning signs ISO 7010:2011 shall be installed in front of the installation site.

џ

Keep outsiders away from the installation site!

џ

Safety regulations must be observed during installation!

6.1 Preliminary check

Make sure that the following conditions are met to ensure safe and reliable operation of the Boom 

Barrier:  

џ

The installation site soil should provide high stability of the base plate.

џ

The boom should not be in contact with foreign objects (e.g. tree branches) along the entire move-
ment and should move at least 2 m apart overhead power transmission lines.

џ

Make sure that there are no underground utilities at the installation site!

џ

No underground pipes and/or cables to be available within the excavation area for the base plate 
installation.

џ

If there is a risk of damage of the Boom Barrier body by passing vehicles, then the required precau-
tionary measures to be taken, if applicable, to protect it from impacts.

џ

The Boom Barrier rack to be securely grounded to ensure electrical safety.

џ

The Boom Barrier installation requires preliminary pulling of electric cables and, if necessary, laying 
of the base plate. 

- if the cabinet is on the right, it is a right version of boom-barrier.

Prior to installation make sure of availability 

of all necessary tools and materials, ensuring the 
system  installation  in  full  accordance  with  the 
applicable safety regulations.

Note to boom barrier installation:

The barrier may be used exclusively for the passage of vehicles. Pedestrians shall not pass under 

a moving arm. A passage suitable for pedestrians should be provided. This passage shall be indicated 
by a special sign;

The cabinet door shall be located on the inside of the territory. If you are in the centre of the pas-

sageway, turn towards the outside:

- if the cabinet is on the left, it means it is a left version of boom-barrier,

6.2 Tools 

The minimum kit of the required installation 

tools is shown in Figure below.

Page

-11-

 

 

 

 

         

     Size А4

Installation and Operation Manual

Revision 1.0                     2021

ROAD BLOCKING SYSTEMS

 

Office and Production site:               

                                              

Tel.: 

+380 (44) 291-21-11

 14 Promyslova str., 02088, Kyiv, Ukraine,                                     

Fax:

 +380 (44) 291-21-02

 E-mail:

 [email protected]                                                                              www.tiso.global   

                         

  BOOM BARRIER OPTIMUS 

Summary of Contents for Optimus 40

























Reviews: