Page
26
Dishwasher
User Manual
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Dishes and
flatware not
clean
Improper program
Refer to the “Loading the dishwasher
baskets” section for instructions on how to
correctly load the dishes (Page 7)
Improper basket loading
Select a more intensive program. Refer to
the “Wash cycle table” to identify a suitable
program. (Page 14)
Inadequate amount of
detergent is being dispensed
Use more detergent, or change your
detergent. Rearrange the items so that the
spray arms can freely rotate
Spray arm blockage
Sound from detergent cup opening.
Improper filter installation or
dirty filters - this may cause a
blockage to the spray arm jets.
• Clean and/or fit the filters correctly.
• Clean the spray arm jets – Refer to the
“Cleaning the spray arm” section (Page 18)
Cloudiness on
glassware
Combination of soft water and
too much detergent
Use less detergent if you have soft water
and select the shortest cycle to wash the
glassware and to get them clean.
Yellow or brown
film on inside
surfaces
Tea or coffee stains
Using a solution of 1/2 cup of bleach and 3
cups of warm water to remove the stains by
hand.
WARNING //
You have to wait for 20 minutes
after a cycle to let the heating elements cool
down before cleaning interior; otherwise,
burns will happen.
Iron deposits in water can
cause an overall film
You have to call a water softener company
for a special filter.
White film on
inside surface
Hard water minerals
To clean the interior, use a damp sponge
with dishwasher detergent and wear rubber
gloves. Never use any other cleaner than
dishwasher detergent for the risk of foaming
or suds
Rust stains on the
cutlery
The affected items are not
resistant to corrosion.
Ensure that all items placed in the
dishwasher are resistant to corrosion.
The detergent
dispenser lid
cannot be closed
properly
Clogged detergent residue is
blocking the catch
Clean the detergent from the catch.
Troubleshooting