Page
20
Dishwasher
User Manual
NOTE //
Improper installation of the filters
may reduce the performance level of the
appliance and damage your dishware.
WARNING //
Never run the dishwasher
without the filters in place.
Cleaning the spray arms
The spray arms should be cleaned regularly
to ensure efficient operation of the spray jets
and bearings. To do so, remove the spray
arms from the dishwasher by following the
steps below:
1. To remove the spray arms, unscrew the nut
(clockwise)
2. Remove the washer from the top of the
spray arm and then remove the arm itself.
3. Wash the arms in warm soapy water and
use a soft brush to clean the jets. Rinse
thoroughly.
4. Repeat the steps in reverse to reinstall the
spray arms in position.
Cleaning the dishwasher
It is not recommended to use solvents or
abrasive cleaning products to clean the
exterior and rubber parts of the dishwasher.
Only use a cloth and warm soapy water.
To remove darker spots or stains from
the surface of the interior cavity, use a
cloth dampened with water and a small
amount of white vinegar. Cleaning products
made specifically for dishwashers are also
indicated.
Cleaning the door seals
Food debris can get trapped in the door
seals and it can be the cause of bad odours
inside the appliance. Periodic cleaning the
seals with a damp sponge will prevent it from
happening.
WARNING //
Never use a spray cleaner to
clean the door panel as it may damage
the door lock and electrical components.
Abrasive agents or some paper towels should
not be used because of the risk of scratching
or leaving spots on the stainless steel surface.
Maintenance and Cleaning