Dishwasher
User Manual
Page
15
IMPORTANT //
Avoid running your
dishwasher with the rinse aid level below ¼
of the full capacity.
As the level of rinse aid decreases, the size of
the dark dot reduces as illustrated below:
Adjusting the amount of rinse aid
released in every wash
The rinse aid dispenser has six (or four)
settings. Always start with the dispenser set
on “4”.
If marks or poor drying occurs, increase the
amount of rinse aid released by adjusting
the setting by removing the dispenser lid and
rotating the dial to “5”. Ensure you close the
lid securely before commencing the cycle.
If the dishes are still not drying properly or
are left with marks, adjust the dial to the next
consecutive number until your dishes are
spot-free. The factory setting is “4”.
NOTE //
Reduce the rinse aid dosage to a
lower level if crockery is found with sticky
white streaks or a bluish film on glassware or
knife blades at the end of the cycle.
Full
¾ Full
½ Full
¼ Full – Should refill to
eliminate spotting
Empty
Operating Instructions
MAX
1
3
4
5
6
2
Adjust lever
(Rinse)