20 of 90
Raising the cabin using electrical supports (special equipment)
Attention
Risk of damage
•
Make sure to never raise the rear of the cabin higher than the front.
This could result in the alcove resting on the roof of your carrier
vehicle.
•
Start raising the cabin using the front supports.
•
Use the option to
extend all supports at the same time
.
Note
•
It is optionally possible to operate the electrical supports using a
wireless remote control.
In case of cabins with electrical supports, insert plug
1
of remote control
3
into bushing
2
in the interior
next to the entry door. Position yourself such that you have a clear view of the cabin. The length of
remote control cable
3
is sufficient to walk around the cabin.
