28 of 90
Lowering the cabin using the crank supports
Attention
Risk of damage
•
Make sure to never raise the rear of the cabin higher than the front.
This could result in the alcove resting on the roof of your carrier
vehicle.
•
Start raising the cabin using the front supports.
•
Use the option to
extend all supports at the same time
.
Lower the cabin by turning the crank supports counterclockwise. First retract the rear supports
followed by the front supports.
Once the supports are completely retracted, loosen cotter pin
1
, pull out bolt
2
and insert attachment
part
3
into the support. Stow pads
4
in the vehicle.
Removing the front crank supports
Unscrew wing screw
1
on the cabin and fold support
3
down. Pull crank support
2
out of the holder
and store crank support
2
in the stowage space.
