Tisch Environmental TE-5200, Operation Manual

Page: 6 / 34

TE-5200 6 Operations Manual
Introduction
EPA Standards
The following manual will instruct you in the unpacking, assemblage,
operation, calibration, and usage of the corresponding Tisch Environmental
product. For information on air sampling principles, procedures and
requirements and to ensure compliance with government regulations please
contact the local Environmental Protection Agency Office serving your area
or visit www.epa.gov.
Safety Precautions
Before using Tisch Environmental products, always be sure to review the
corresponding operations manuals and take all necessary safety precautions.
Tisch Environmental products are to be used only for the purposes specified
by operations manuals and by Tisch Environmental personnel. Tisch
Environmental cannot guarantee the safe usage of its instruments in
procedures that do not adhere to Tisch Environmental guidelines and
standards. If you have concerns about the safety of your product or questions
about safe practices, contact Tisch Environmental by phone or e-mail to
speak with a representative.
Important Safety Instructions
Read and understand all instructions. Do not dispose of these instructions.
Failure to follow all instruction listed in this manual may result in electric
shock, fire, and/or personal injury. When using an electrical device, basic
precautions must always be followed, including the precautions listed in the
safety section of this manual. Never operate this unit in the presence of
flammable materials or vapors are present as electrical devices may produce
arcs or sparks that can cause fire or explosions. Always disconnect power
supply before attempting to service or remove any components. Never
immerse electrical parts in water or any other liquid. Always avoid body
contact with grounded surfaces when plugging or unplugging this device is
wet or dangerous conditions.