TIPTEL Profi Clip, Operating Instructions Manual

Page: 7 / 20

Page 7
Installation
Initial operation
After connection, your telephone immediately is ready for operation.
The default display language is German, to change it to English, please do the following steps:
-
Press the menu button
-
Press the
Ñ Ñ Ñ Ñ
key 3 times, the display shows “DEUTSCH”
-
Press the menu button, and again
Ñ Ñ Ñ Ñ
, the display turns to “ENGLISCH”
-
Press the menu button again to save your choice
All display texts are now in English
The telephone offers the following function and features:
ð
large display (4 lines), two symbol bars, 1 numeric line for presentation of the phone number, 1
alphanumeric line for display of name, status.
ð
CLIP function
ð
hands-free mode
ð
5 phone number memory M1 up to M5 via speed dialling keys
ð
electronic telephone book for up to 65 entries (name and phone number)
ð
call list for up to 60 calls with date and time
ð
The telephone can be used at a single line or can be connected to a PABX.
Battery exchange
The battery has to be exchanged if the battery is indicated in the display. For this purpose,
open the battery compartment, remove the discharged battery and insert a new 9 V alkaline block
battery (refer to: “installation”). Please observe the correct polarity! This battery exchange has to be
carried out within one minute. Otherwise, the saved data can be lost (electronic telephone book, entries,
messages etc.). Discharged batteries have to be disposed of environmentally and according to legal
rules and regulations!