Page 13
Press
key
1x
2x
3x
4x
5x
key
1 1
Empty
& / =
2 A
B
C
2
3 D
E
F
3
4 G
H
I
4
5 J
K
L
5
6 M
N
O
6
7 P
Q
R
S
7
8 T
U
V
8
9 W
X
Y
Z
9
0
0
* back
# forward
Please note:
Cursor to the left
Cursor to the right
empty
space/gap
Electronic telephone book
General information
The electronic telephone book distinguishes between
entries consisting of name and corresponding phone
number (alphabetical order) and phone number entries
without name (ascending order).
You have the possibility to browse through the electronic
telephone book, to add new entries, to edit existing
entries and to delete individual entries or all entries.
In order to add new entries or to carry out modifications
in the electronic telephone book, it is possible to enter in
the editing mode letters, digits or special
symbols/characters via the keyboard. Several
functions/characters are assigned to the keys. Any time
you press the keys, the corresponding character is
displayed. The opposite table shows the assignment of
the desired letters/characters to the individual keys.
Remark:
The individual entries in the following chapters have to be made within
15 seconds
, otherwise the
message
INVALID
is displayed for 3 seconds.
If the content of an edit field should be corrected, use the
ç
key for the correction of digits/numbers
and, for the correction of letters/characters, press the cursor keys (
&
o
'
) until the wrong letter is
reached. Then, delete this letter by means of the
ç
key or replace it by the correct letter.
New entry in the storage locations M1 up to M5 or in the electronic telephone book
Press the key
)
)
)
)
.
The message
CHOOSE MEMORY
is displayed. Now, you can select from the 5
available storage locations M1 up to M5 or the electronic telephone book. If the memory M1 should be
used, press the key M1. Enter the desired phone number (with a maximum of 18 digits) where the
blinking cursor is positioned.
ENTER NUMBER
Enter the requested phone number and confirm your
entry by pressing
)
)
)
)
.
The message
ENTER NAME
is displayed. Enter the requested letter (a maximum of 18 letters possible)
where the blinking cursor is positioned. Press the key assigned to the desired letter as often as it is
necessary to have the intended letter displayed (the assignment of letters/characters to the individual
keys is indicated in the above mentioned table). In order to enter the next letter, move the cursor to the
right by means of the
'
key. After all letters and characters have been entered, confirm your entry by
pressing
)
. As confirmation, the message
STORED
is displayed for ca. 3 seconds.
If no name should be assigned to a phone number, please skip the entry process for the name by means
of the
)
)
)
)
key.
If, however, an entry in the electronic telephone book should be carried out, the key
DIR/CALLS
DIR/CALLS
DIR/CALLS
DIR/CALLS
has to
be pressed after
CHOOSE MEMORY.
The message
ENTER NUMBER
is shown in the display. Enter
the requested phone number and confirm your entry by pressing the
)
)
)
)
key.
ENTER NAME
is displayed. Enter the requested letter (a maximum of 18 letters is possible) where the
blinking cursor is positioned. Press the key assigned to the desired letter as often as it is necessary to
have the intended letter displayed (the assignment of letters/characters to the individual keys is indicated
in the above mentioned table). In order to enter the next letter, move the cursor to the right by means of
the
'
key. After all letters and characters have been entered, confirm your entry by pressing
)
. As
confirmation, the message
STORED
is displayed for ca. 3 seconds.
If no name should be assigned to a phone number, please skip the entry process for the name by means
of the
)
)
)
)
key.
Summary of Contents for Profi Clip
Page 1: ...Operating instructions INT tiptel Profi Clip tiptel...
Page 19: ...Page 19...