TIPTEL Profi Clip, Operating Instructions Manual

Page: 16 / 20

Page 16
+
+ +
+ 20/12
20/12 20/12
20/12
14
14 14
14:35
:35 :35
:35
NEW
Call no.
1 11 1
3 33 3
07211783860
CLIP function
General information
The CLIP function of your telephone offers the following possibilities:
- the caller can be identified by means of the displayed phone number before the call is answered
- time and date of incoming calls can be determined
- 60 calls can be registered, numbered according to their chronological order
- the number of all incoming calls as well as all newly received calls is indicated in the display
- the caller’s phone number is compared with that in the electronic telephone book and the caller’s
name is displayed
- browsing through the call memory/call list
- automatic dialling of a phone number from the call list
- storing of a phone number from the call list into the electronic telephone book
- individual entries or all entries can be deleted in the call list
Remark:
In order to be able to benefit from the advantages of the CLIP function, the service “calling line
identification presentation” has to activated by your local network operator/telecommunications company.
In case of an incoming call, the phone number is displayed only if the central office supports this feature
and if the caller has not activated the CLIR function (calling line identification restriction).
Display messages for incoming calls
In case of incoming calls, the caller’s phone number is
stored in the call memory in chronological order. The
following pieces of information are displayed for 15
seconds:
-
Consecutive number of new calls
-
Time and date of incoming call
- Caller’s phone number
-
Total number of incoming calls
If the caller’s phone number is in accordance with an entry in the electronic telephone book, the
corresponding name is displayed.
If the transmission of the phone number was deactivated by the caller or if it was not activated by the
network operator/telecommunications company, the display message is
NO CALLER INFO
. These
calls will not be stored in the call memory.
Remark:
If the call is answered (handset is picked up) before the call information is displayed, it will not be stored
in the call memory.
Browsing
In order to obtain more information on the incoming calls, you can browse through the call memory.
Press the
DIR/CALLS DIR/CALLS DIR/CALLS DIR/CALLS
key for less than one second. The phone number of the call received last is
displayed. By means of the keys
DDDD
and
Ñ Ñ Ñ Ñ
, it is possible to scroll back and forward. If the call memory is
empty, the message
NO CALLS
is displayed. After the last entry in the call memory,
END OF LIST
is shown in the display. Press the
Ñ
Ñ Ñ
Ñ
key and the display switches to the beginning of the call list,
indicating
TOP OF LIST
in the display.