14
The charge level of the batteries in the handset is shown in the display:
Batteries dead
Batteries up to 40 %
charged
Batteries up to 60 %
Batteries up to 80 %
charged
charged
Batteries fully charged.
The first time you charge the batteries, we recommend an uninterrupted
charging time of at least 16 hours, regardless of the charge level display!
After each call, you can return your handset to the base station. Electronic
control ensures optimum and protective charging of the batteries.
The batteries warm up during charging; this is a perfectly normal process
and is not dangerous.
The charge level for the batteries displayed is only correct after an
uninterrupted charging / discharging process. You should not, therefore,
open the battery compartment unnecessarily.
Remark:
The charge level display is used for orientation of the remained
energy reserve.
Recommended batteries:
Use only Nickel cadmium (NiCd) or Nickel metal hydride (NiMH) batteries with
a minimum battery capacity (NiCd: 700 mAh and above, or NiMH: 1200 mAh
and above).
For replacement or as a reserve, we recommend rechargeable, standard
batteries with the above minimum capacities.
The use of other battery types or non-rechargeable batteries /
primary cells can be dangerous and can also lead to
malfunctions or damage to the telephone. The manufacturer
accepts no liability in such cases.
Setting up the telephone
Using several handsets
59
Making an internal call
Internal calls are calls to other handsets that are registered. Internal calls are
free of charge.
e.g. 123
Press the intercom key. The internal call
numbers of all handsets registered are
displayed.
e.g. 2
Enter the internal call number.
Or
All
Press the All key. All handsets registered are
called (collective call).
When the other internal party answers, you
can speak to them.
Press the Lift / Replace key to end the call.
Transferring a call
You can transfer (connect) an external call to another handset. If you have
established an external connection:
Press the intercom key.
e.g. 2
Enter the internal call number.
When the other internal party answers,
announce the external call. Then:
Press the Lift / Replace key. The call is
connected.
Instead of announcing the call, you can press the Lift / Replace key
immediately. If the other internal party does not answer or is busy, the call
automatically returnes to you.
