10
4.2
Assembly of the Lubricator
a)
■
Insert the battery set into the drive unit (according to the direction of the arrow on the label).
■
Check the position of the jumper. It must correspond to the size of the C-Power LV-unit
(refer to figure 4 and chapter 7.1).
Figure 4
b)
■
Place the C-Power LV-unit inside the protection cover and remove the plug (refer to figure 5).
Figure 5
Battery set
Catch Interlocking
teeth
Setting 250 cc
C-Power LV-unit
Plug
Jumper
Setting 500 cc
Jumper
Protection cover
