2
The Weathersafe Vision range complies with the
following standards.
• IP66 rating: BS EN 60529.
• Socket outlets: BS 1363.
• RCD units: BS 7288.
• Fused connection units: BS 1363.
• Switches: BS EN 60669.
• All products in the range comply with the low voltage
directive LV 2006/95/EC and where relevant the
EMC directive 2004/108/EC.
• Voltage: 230V AC 50Hz.
• Operating temperature range: -5° to 55°C.
Installation instructions
• These products should be installed by a competent
person (e.g. qualified electrician) in accordance with
these instructions and in compliance with the appropriate
clauses of the current edition if the IEE wiring and
building regulations. Sockets should be connected
via a suitable RCD device.
• Disconnect the mains electricity supply before installing.
• The Weathersafe Vision range is designed to be mounted
on a vertical flat surface, with socket outlets not more
than 1 metre above the ground.
• The rear box shall be mounted on the wall using No. 8
wood screws and wall plugs if necessary (see fig. 1).
• If the mounting surface is uneven use a sheet of
marine ply as a base plate then fit the rear box to it.
