17
• PIR sensor
will not operate
at all.
Check that the power is switched ON at the
circuit breaker/internal wall switch.
Turn OFF the power to the unit and check
the wiring connections as per the diagram
(see 7. Connection Diagram).
Ensure no connections are loose.
Check the bulb (if it’s replaceable). If the
bulb has failed, replace (do not hold the
bulb directly with fingers, use a tissue or
clean dry cloth).
Where relevant, ensure the bulb is seated
correctly in the bulb holder.
• The PIR sensor
will not operate
at night.
Refer to section 8. Setting Up for DUSK
control adjustment.
• Unit activates
during the
daytime.
Refer to section 8. Setting Up for DUSK
control adjustment.
You may not be allowing the unit time to
complete its warm-up period. Stand well out
of the detection range and wait (the warm-
up period should never exceed 5 minutes).
Occasionally, winds may activate the sensor.
Sometimes passages between buildings
etc. can cause a “wind tunnel” effect.
Ensure the unit is not positioned so as to
allow detection of cars/people using public
thoroughfares adjacent to your property.
Ensure that the unit is mounted securely,
even the slightest movement can result
in a false detection.
