Page 4
Setting Date and Time
1. Press
to power up the Time-
clock.
2. Press-and-hold
to display the
main menu
3.
Select
System
and then select
Date/Time
.
4.
Set the date and time, using the
keypad and arrows.
5. Press
to save settings.
6.
Press
ESC
to return to the main
screen.
7. Verify that the date and time are
correct.
Adding and Enrolling Employees
1. Press-and-hold
to display the
main menu.
2. Select
User
and then select
Add User
.
3. Define the following the settings:
ID
ID
Name
ID
4. Choose and fill-in one of the following
options:
FP
(Fingerprint)
Verify that the protection sticker has been removed.
Place and lift desired finger three times, as instructed.
PWD
(Password)
Enter a 4-8 digit PIN.
Card
Wave the card over the Time-clock top-right across the double line.
5. Press
ESC
until the main screen is displayed.
6. To test the settings, clock in by your chosen option:
FP
Place the registered finger on the sensor, covering the entire surface.
PWD
Using the number keypad, enter your ID number and then your PWD.
Card
Slowly wave the proximity card once over the fingerprint sensor surface.
7. For each employee, repeat instructions 4-6.
Note:
Timedox automatically registers the first punch as IN and the following one as OUT.
