Page 5
Data Transfer Options
The Timedox Silver Plus offers two standard connection options for transferring data.
Choose your preferred option below and follow the relevant instructions.
Connection Option
Requirements
Network Connection
(Recommended)
Available network and Ethernet Port
USB Connection
A compatible USB 2.0+ storage device
Note:
Choose your connection option before proceeding.
Connect via your Network
1. Verify that the Ethernet cable is connected to the Time-clock and wall designated ports.
2. Press-and-hold
to display the main menu.
3. Select
System
and then select
Comm
.
4. Use the arrows to select the DHCP option and turn it
to ‘on’, and then press
5. Remove the power cord from the timeclock for 30 secs, and then replace it.
6. Press
to power the timeclock back on and repeat steps 2 & 3.
7. Find the IP address (and other options) and note down the IP address here:
_________________________
8. Download the application named
OfflineDeviceManager
from the Timedox support
page.
(See Page 1 for intructions on accessing the support page)
9. Luanch the application and enter the password
‘Timedox’
10. Select add Device and follow the screen prompts/
Download via the PC
– USB
1. Connect your USB device to the port on the left side of your Time-clock.
2. Press-and-hold
to display the main menu.
3. Select
Data Mgt.
and then select
Download Attlog
.
4. Wait for files to be downloaded to the device.
5. Connect the USB to the PC.
