timecode systems UltraSync BLUE User Manual Download Page 48

Page: 48 / 118

To set up your UltraSync ONE as a Master TX:

1. Connect your camera or sound mixer/recorder to your UltraSync ONE.

If you want your UltraSync ONE to provide timecode via the LTC port, connect

your device to the LTC port. Use the blue DIN 1.0/2.3 to BNC cable that is

supplied with your UltraSync ONE.

If you want your UltraSync ONE to provide timecode, genlock, or word clock

via the SYNC port, connect your device to the SYNC output port. Use the red

DIN 1.0/2.3 to BNC cable that is supplied with your UltraSync ONE.

2. Configure the device that is connected to your UltraSync ONE so that it can

receive timecode. See the device manufacturer's instructions for more

details.

3. Make sure your UltraSync ONE is switched on (see

Switch UltraSync ONE On

and Off on page 11

4. Press the

Select

button.

Set the RF Country/Area (see page 64)

. You only need to do this step if you

are setting up your UltraSync ONE for the first time or are using it in a

different area of the world.

6. Set the

Timecode Mode

Master TX

Set the RF Channel (see page 68)

The

RF Channel

defines which RF network your UltraSync ONE master will

create. To join this network, slave devices will need to use the same channel.

8. If you want your UltraSync ONE to output genlock, word clock, or timecode

via the SYNC port, set the appropriate

SYNC O/P Mode

(see

Set the SYNC

Output on page 76

). If you are not using the SYNC output, ignore this step.

9. Use the

Set Timecode

option to set the clock for your master UltraSync ONE

Set the Timecode for the Master on page 72

10. Use the

Set FPS Rate

option to set the frames-per-second rate to match the

FPS of the connected device (see

Set the Frame Rate Per Second on page 73

11. Use the

Local or EXT U/B

option to set your UltraSync ONE to use either local

user bits or external user bits (see

Set the User Bits on page 74

). If you choose

local user bits, you will also need to set the user bits.

UltraSync ONE User Guide

Summary of Contents for UltraSync BLUE























































































































Search results

Summary of Contents for UltraSync BLUE

Reviews:

Related manuals for UltraSync BLUE

Brands by name

Popular brands

timecode systems UltraSync BLUE, User Manual

Search results

Summary of Contents for UltraSync BLUE

Reviews:

Related manuals for UltraSync BLUE

Brands by name

Popular brands