
This section only applies if your UltraSync ONE is running in
data from the master or external timecode source.
The FPS (Frames-Per-Second) of your UltraSync ONE has to match the FPS of the
cameras and sound mixers/recorders that are being used on the shoot. This is
because timecode can only be applied accurately to each recorded frame if the
1. Make sure your UltraSync ONE is switched on (see
).
2. Press the
Select
button.
3. Use the
Up
and
Down
buttons to scroll to the
TC Generator
option.
4. Press the
Select
button.
5. Use the
Up
and
Down
buttons to scroll to the
Set FPS Rate
option.
6. Press the
Select
button.
7. Use the
Up
and
Down
buttons to set the UltraSync ONE's FPS to the
appropriate value.
8. Press the
Select
button to confirm.
You also need to
Set the Timecode for the Master (see page 72)
.
Note:
If your UltraSync ONE is running in Master TX mode, it will send the
FPS to the slave units in the RF network, so that they also use the same
FPS.
UltraSync ONE User Guide
73
Summary of Contents for UltraSync BLUE
