timecode systems UltraSync BLUE User Manual Download Page 76

Page: 76 / 118

Set the SYNC Output

Your UltraSync ONE has a

SYNC

output port that can output word clock, genlock, or

timecode (LTC). You should use the SYNC port if:

You want to output genlock to a camera for added accuracy

You want to output word clock to a sound mixer/recorder for added accuracy

You are using the LTC port as an input port and need to output timecode via a

wired connection.

Note:

You can use the SYNC output in any of the UltraSync ONE modes.

To use the SYNC port, you need to set the

Sync O/P Mode

. You may also need to set

the

Sync O/P Level

1. Set your external device (camera, sound mixer/recorder) to receive genlock,

word clock, or timecode from an external source. Please refer to the

manufacturer's instructions for more details.

2. Connect your camera or sound mixer/recorder to the SYNC port. Use a

suitable cable (the red DIN 1.0/2.3 to BNC cable that is supplied with your

UltraSync ONE is suitable for some devices).

3. Make sure your UltraSync ONE unit is switched on (see

Switch UltraSync ONE

On and Off on page 11

4. Press the

Select

button.

5. Use the

and

Down

buttons to scroll to the

Sync Generator

option.

6. Press the

Select

button.

7. Use the

and

Down

buttons to scroll to the

Set Sync O/P Mode

option.

UltraSync ONE User Guide

Summary of Contents for UltraSync BLUE























































































































Search results

Summary of Contents for UltraSync BLUE

Reviews:

Brands by name

Popular brands

timecode systems UltraSync BLUE, User Manual

Search results

Summary of Contents for UltraSync BLUE

Reviews:

Brands by name

Popular brands