STEP 6:
Install the log tray assemblies. See FIGURE 9.
1.
Lower the beam to horizontal position. Please refer to
“Beam Operating Positions” section in
Page 23.
2.
Position the log tray frames onto the beam as shown below and secures with the M10 hardware loosely.
3.
Tighten the M10 hardware using a 16mm wrench on the bolts, and a 17mm wrench on the lock nuts
(FIGURE
9)
REF.
NO.
12
13
13-1
13-2
13-3
DECSRIPTION
QTY.
Log tray assembly
2
Hardware Kit # 6-1, including:
1
Hex head bolt / M10 x 45
4
Flat washer / M10
8
Lock nut / M10
4
Page 18
