Step 2:
Remove all loose parts included in the container, e.g. wheels and hardware box.
Step 3:
Use scissors or a knife to cut and remove the straps securing the parts to the beam or tank assembly, including
tongue assembly and log tray assemblies, and put aside these parts for assembly.
NOTE:
DO
NOT
remove the strap securing the hydraulic hoses assemblies to the beam at this time, until you do the
assembly procedure of the hoses.
Step 4:
Use scissors or a knife to cut and remove the straps securing the engine / pump assembly to the crate bottom,
and then place aside carefully for assembly.
Step 5:
Use a pry bar or claw hammer to remove the plywood splinters securing the beam and tank assemblies on the
crate bottom. Take out the two heavy assemblies.
NOTE:
Due to the weight / size of the two assemblies, it
’s recommended two or more adults to assist lifting and moving
the two assemblies. Lifting tools as hoist, crane, jack, etc. are recommended too.
Step 6:
Inspect all component assemblies, parts and accessories according to the packing list attached in this manual
(Page 35). Make sure all items listed in the packing list are included and of no shipping damage
.
If
any
parts
are
damaged
or
missing,
please
call
our
customer
service
department
for
assistance.
NOTE:
DO
NOT
discard the packing materials until you have carefully inspected and satisfactorily operated the tool.
Page 12
