Know
Controls
and
Features
Cylinder
Control
Handle
Splitting
Wedge
Tongue
Log
Dislodger
Log
Tray
Flip-down
Stand
End
Plate
Horizontal
Beam
Lock
(FIGURE14)
NOTE:
This O
perator’s Manual covers several models. Log splitter features may vary by model. Not all features in this
manual are applicable to all log splitter models and the log splitter depicted may differ from yours.
Beam
Lock
The horizontal beam lock, as its name suggests, is used
to secure the beam in the horizontal position. The
horizontal beam lock is located on the beam support
latch
bracket.
Engine
Controls
See the Engine Operator
’s Manual for the location and
function of the controls on the engine.
Control
Handle
The control handle has three positions; Forward, Neutral
and Reverse. See the Operation section for instructions
Splitting
Wedge
The wedge is used to split the wood.
Log
Dislodger
The log dislodgers are designed to remove any
partially split wood from the wedge. This may occur
while splitting large diameter wood or freshly cut
wood.
Log
Tray
The log trays are designed to catch the log after it is
split.
Tongue
The tongue is used to attach to a towing vehicle for
transportation.
End
Plate
The end plate holds the log in place while the wedge
splits the log.
Page 22
