background image

© 2013 Snow Joe, LLC
All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

OPERATOR’S MANUAL

A Division of Snow Joe

®

, LLC

Form No. SJ-LJ601ERM-880E

Electric Log Splitter

Electric Log Splitter

Model No. LJ601ERM

IMPORTANT!

Safety Instructions

All Operators Must Read These 
Instructions Before Use

Always follow these safety guidelines. Failure to do so may 
result in serious bodily injury or death.

General Safety Warnings!

When using the log splitter, basic safety precautions should 
always be followed to reduce the risk of fire, electric shock, 
and personal injury, including the following:

m

 

WARNING!

 The use of any other accessory or 

attachment might increase the risk of injury.

TRAINING

Before using the log splitter, take the time to familiarize 
yourself with the controls, especially how to stop the log 
splitter in an emergency. Only individuals who have read these 
instructions and have a thorough understanding of these 
instructions shall operate the log splitter. Never allow children, 
under the age of 18, to operate the log splitter.
Retain this manual for future reference and reread it at the start 
of each log splitting season.

1. 

Read, understand, and follow all instructions on the 
log splitter and in the manual(s) before attempting to 
assemble and operate. Save this manual for reference 
and ordering replacement parts.

2. 

Never allow children under 18 years old to operate this 
machine. Children 18 years old and over should be 
trained and supervised by an adult who understands 
the operation of the log splitter.

3. 

Never allow an untrained individual to operate the log 
splitter.

4. 

Understand the function of all the controls and their 
proper operation. Know how to stop the machine in 
case of emergency.

PREPARATION

Work Area

1. 

Plan your log splitting pattern to avoid discharge of 
material toward people, pets, and property. Thrown 
objects can cause serious personal injury.

2. 

Always inspect the area where the log splitter is to 
be used. Ensure the surface the machine is on is  
60 – 75 cm (23.62" – 29.50") high, stable, level and free 
from overhanging items such as limbs, wires etc.

3. 

All visitors: children, adults, and pets, should be kept 
at a distance from working area, at least 5 m (16.5 ft.) 
from the log splitter while it is in operation. Stop the log 
splitter if people or pets enter the discharge area.

4. 

Always observe the surface conditions to avoid 
slipping, falling, and unexpected objects.

5. 

Avoid Dangerous Environments – Don’t use appliances 
in damp or wet locations. Do not operate the log splitter 
in the rain or wet conditions.

6. 

Operation of the log splitter where temperatures are 
below 5ºC (41ºF) or above 40ºC (104ºF), at a high 
altitude and/or high humidity may result in a malfunction 
of the machine. Do not use the log splitter in poor 
environmental conditions.

7. 

Ensure electrical conditions meet requirements (see 
ElectricSafety).

8. 

Do not use the machine where gasoline, natural gas or 
other flammable vapors are present. The electric motor 
may spark and cause an explosion or fire.

Protective Clothing

1. 

Thrown objects can cause serious injury to the eyes 
and exposed body. Always wear safety glasses or 
eye shields during operation and while performing an 
adjustment or repair. Always use face or dust mask if 
operation is dusty.

2. 

Use of rubber gloves and substantial footwear is 
recommended when working outdoors. Wear protective 
hair covering to contain long hair.

3. 

Always operate wearing adequate protective garments. 
Dress Properly – 

Do not

 wear jewelry or other loose 

clothing, which could become entangled in moving 
parts. Wear footwear that provides protection for the 
feet and ensures sure footing.

4. 

Always use ear protection if the noise level exceeds 85 
dB. Observe any noise prevention regulations and laws.

5. 

Inspect the log splitter for worn, missing or damaged 
parts and safety labels. See maintenance section for 
detailed instructions.

6. 

Use the Right Appliance – Do not use this appliance for 
any job except that for which it is intended.

Wood Condition

1.  Do not

 split oversize logs (max. log diameter: 10", max 

log length: 20"). 

Do not

 attempt to split “hard” wood 

that requires more than 5 seconds to split.

2. 

Ensure the log is free from items that may be projected 
or cause damage to the machine (ie.: nails, wire).

3. 

Ensure the end of the log is cut square and all branches 
have been cut flush.

1

Summary of Contents for LJ601ERM













Reviews: