Timberk TEC.E1X M 1000, Instruction Manual

Page: 27 / 60

IM2021
27
°C, in order to avoid damage, accidents, fire, due to poor electrical contact
replace the socket with help of a specialist.
WARNING!
The power socket should be rated at least 10A Electric cable with a core with cross-
section of at least 3x1.5 mm
2
(copper).
8. OPERATION OF THE DEVICE
Control panel:
Fig.9*
1. Double button switch
Used to select the following heating power modes:
Mode 1 (low power)
Mode 2 (medium power)
Mode 3 (high power)
2. Thermostat handle
Used to set the room temperature.
*Image is for reference only and may differ from actual control panel.
Operation of the convector
1. Turning ON
1.1 Plug in the convector to the network by connecting the plug to the electric outlet