T H E F O O D S A V E R U S E R M A N U A L
15
6
Set the sealing time adjustment to
“1” or “2.”
7
Press and release the On button.
When the vacuum cycle is done
and air is removed from the canis-
ter, the red sealing light will blink
indicating the machine is re-pro-
gramming itself for the next func-
tion. The lid will open slightly
returning to the ready position.
Do not lift the lid until after the
red sealing light stops blinking
and the lid has reset to the ready position.
8
Vacuum packaging is complete.
How to Open the FoodSaver Designer Canister
To open the FoodSaver Designer Canister, press and hold down
the grey rubber button in the center of the lid. This will release
the vacuum and you should be able to remove the lid.
IMPORTANT: Remember to remove the accessory hose from the
accessory port on the FoodSaver Professional II before you
vacuum package in FoodSaver Bags.
How to Vacuum Package Using FoodSaver
Designer Canisters
T H E F O O D S A V E R U S E R M A N U A L
14
FoodSaver Designer Canisters are both functional and attractive
and an excellent way to store delicate items in the refrigerator,
pantry, or on the countertop. FoodSaver Designer Canisters
cannot be stored in the freezer and, unlike the Bulk Storage and
Square Canisters, cannot be used in the microwave. The bases
can be put in the dishwasher for cleaning.
However, do not put
the lids in the dishwasher.
1
Place the Professional II on a flat, dry surface and plug the power
cord into a standard electrical outlet.
2
Place the item(s) to be vacuum packaged inside the canister. Leave
at least one inch between the contents and the rim of the canister.
3
Place the lid on top of the canister.
4
Insert one end of the accessory
hose into the accessory port on
the Professional II.
5
Insert the other end of the accessory
hose into the hole on the top of
the canister.
