How to Vacuum Package Using FoodSaver
Bulk Storage and Square Canisters
T H E F O O D S A V E R U S E R M A N U A L
16
T H E F O O D S A V E R U S E R M A N U A L
17
7
Set the sealing time adjustment to
“1” or “2.”
8
Press and release the On button.
When the vacuum cycle is done
and air is removed from the
canister, the red sealing light will
blink indicating the machine is
re-programming itself for the next
function. The lid will open slightly
returning to the ready position.
Do not lift the lid until after the
red sealing light stops blinking
and the lid has reset to the ready position.
9
Turn the knob on the canister lid so the arrow points to
“Closed.”
1 0
Vacuum packaging is complete.
How to Open the FoodSaver Bulk Storage or Square Canister
To open the FoodSaver Bulk Storage or Square Canister, turn the
knob on the canister lid so the arrow points to “Open.” This will
release the vacuum and you should be able to remove the lid.
NOTE: Do NOT attempt to vacuum seal any contents that are
warmer than room temperature, since the vacuum may cause
the contents to bubble out of the canister or jar.
IMPORTANT: Remember to remove the accessory hose from
the accessory por t on the Professional II before you vacuum
package in FoodSaver Bags.
FoodSaver Bulk Storage and Square Canisters are a great way to
store food in your refrigerator and pantry. The Square Canister is
also ideal for marinating.
FoodSaver Canisters cannot be stored in the freezer. The Bulk
Storage and Square Canister bases can be used in the microwave
to reheat foods and put in the dishwasher for cleaning.
Do not
put the lids in the microwave or dishwasher.
1
Place the Professional II on a flat, dry surface and plug the power
cord into a standard electrical outlet.
2
Place the item(s) to be vacuum packaged inside the canister. Leave
at least one inch between the contents and the rim of the canister.
3
The canister lid is labeled “Open,”
“Vacuum,” and “Closed.” Turn the
knob on the canister lid so the arrow
points to “Vacuum.”
4
Place the lid on top of the canister.
5
Insert one end of the accessory
hose into the accessory port on the
Professional II.
6
Insert the other end of the acces-
sory hose into the hole on the top
of the canister.
