Tili MPM3-12HRN1-BH9, Owner'S Manual

Page: 15 / 19

INSTALLATION INSTRUCTIONS
Exhaust hose installation:
The exhaust hose and adaptor must be installed or
removed in accordance with the usage mode.
COOL mode
FAN, HEAT or DEHUMIDIIFY
mode
Install
Remove
The duct can be compressed or extended
moderately according to the installation
requirement, but it is desirable to keep the
duct length to a minimum.
IMPORTANT:
DO NOT OVER BEND THE DUCT (SEE Fig.20)
Fig.18
Fig.16
Fig.17
Fig.20
(Not applicable to the units without adaptor A,
expansion plugs and wooden screws of Accessories )
1. Prepare a hole in the wall. Install the wall Exhaust
adaptor A onto the wall(outside) by using 4 expansion
plugs and wooden screws, be sure to fix thoroughly.
(See Fig.19)
2. Attach the Exhaust hose to wall Exhaust adaptor A.
The exhaust hose can be installed into the wall .
.
Fig.19
max 120CM
min 30CM
Adaptor A
Expansion plug
position
Adaptor
cap
Note:
Cover the hole using the adaptor cap when not in
use.
14
Adaptor B
Adaptor B
1. Install the window Exhaust adaptor B(flat mouth)
onto the exhaust hose as shown in Fig.16. Refer to
the previous pages for window kit installation.
2. Install the flexible Exhaust hose as depicted
in Fig.17 & 18.