Tili MPM3-12HRN1-BH9, Owner'S Manual

Page: 14 / 19

INSTALLATION INSTRUCTIONS
Installation in a sliding sash
windows
1. Cut the foam seal(adhesive type) to the proper
length and attach it to the window frame,Fig.12.
2. Attach the window slider kit to the window stool.
Adjust the length of the window slider kit according
to the width of window, short the adjustable window
kit if the width of window is less than 27 inches.
Open the window sash and place the window slider
kit on the window stool. See Fig.13.
3. Cut the foam seal(adhesive type) to the proper
length and attach it on the top of the window.
Show as in Fig.14.
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and
sealing the open gap between the top window sash
and outer window sash. Show as in Fig.15.
Foam seal
Foam seal A
(adhesive type)
Window
panel
26.5 ~ 48
Fig.12
Fig.13
Fig.14
Fig.15
13