TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300 Installation & Operating Instructions
TiL 08RE389 Rev A Issue 4
2-5
Bands 1 through 4 of the TDFM-7300 Transceiver are programmable by Motorola CPS™.
The following settings may be programmed for each Conventional Channel in a module:
Tx Frequency
Zone
Tx PL/DPL Code
Channel
Rx Frequency
Name
Rx PL/DPL Code
RX Signal Voice Type
Time-Out Timer
TX Signal Voice Type
Scan List
Network Access Code
Phone Numbers
Tx Power
Talkgroup IDs
Private Call Type
Encryption Key Assignment
The following settings can be programmed for each mode in a P25 Trunked and/or
SmartNet/SMART ZONE equipped radio:
System Type
TG Strapping
System ID (NAC)
Zone
Individual ID (UID)
Scan List
Coverage Type
Scan Type
Affiliation Type
Interconnect
Control Channel (s)
Phone Display Format
Talkgroups
Private Call Operation
Status Site
Alias
Encryption Key Assignment
The function keys along with the rest of the keypad, revert to normal number keys during
transmit and when NUM LOCK is selected by pressing the rotary knob.
The F1 – F4 keys can be programmed as Hot Memory keys as mentioned in 2.7. Depending
on the setting in the configuration menu, the keys can be permanently set to Hot Memories
(channels) or used for other functions (normal). When the F1 –F4 keys are in the normal
mode they can still be used for Hot Memory Recall if the FUNC key is pressed first.
2.9 MUP(4) AND MDN(7) KEYS (Memory Up and Down Keys)
These keys provide the same function as the rotary knob does when it is set to CHAN. This
equates to the 16 position rotary knob on the portable. These keys can be used to scroll
through the channels. A single press will step the channel by one, but a push and hold will
scroll to a desired channel number. The function of the rotary knob is automatically set to
CHAN when either of these keys is pressed.
2.10 UP(5) AND DN(8) KEYS
The keys provide the same function as the left and right arrow keys on the portable. The UP
key equates to the right arrow key and the DN is the left. These keys are used for a variety
of functions but in the normal mode they are used to scroll through the soft key menus.
2.11 BRT(6) AND DIM(9) KEYS
Use these keys to dim or brighten the display. The radio powers up at full brightness for
normal use but can be dimmed for night operations.
