TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300 Installation & Operating Instructions
TiL 08RE389 Rev A Issue 4
1-3
TDFM-7300 Model Variations with type II Modules (-3,-4)
4-Band TDFM-7000 Model Variations
TDFM-7300, P/N 061245-3-73YXXX/P73ZZZ
GREEN display.
TDFM-7300, P/N 061245-4-73YXXX/P73ZZZ
RED
display.
TDFM-7300NV, P/N 061245-3-73YXXXNV/P73ZZZ
GREEN NV display.
5-Band TDFM-7000 Model Variations (-73YXXXX)
TDFM-7300, P/N 061245-3-7YXXXX/P73ZZZ
GREEN display.
TDFM-7300, P/N 061245-4-7YXXXX/P73ZZZ
RED display.
TDFM-7300NV, P/N 061245-3-7YXXXXNV/P73ZZZ
GREEN NV display.
Y is an analog module.
See type I Model variations above for available analog modules and nomenclature.
X is type II digital module represented by:
P73ZZZ represents a 4 or 5 digit project
1 for VHF (138-174MHz) module
number that identifies specific options that
4 for UHF Lo (380-470MHz) module
are contained in the modules. P7301 and
5 for UHF Hi (450-520 MHz) module
up project numbers are used in transceivers
8 for 700/800 MHz (764-870)
with type I or type II modules.
Digital module numbers may be specified in any order required. The analog module is always placed
on line 5 of the display. If only 3 digital modules are ordered line 4 of the display will be blank.
Hybrid units that contain a mix of both type I and type II modules will have 061245-3 or –4 part
numbers. At this time only the VHF Lo analog module is available. Contact Technisonic for
availability of other analog modules.
All model variations are capable of supporting both 28 Volt DC and 5 Volt AC back lighting. The
units are shipped set to operate on 28 Volt back lighting. Equipment can be set to operate on 5V
back lighting by using the software based configuration menu. See Section 2.18 configuration
menu.
