TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300 Installation & Operating Instructions
TiL 08RE389 Rev A Issue 4
2-10
FIGURE 2.5
USB to Serial Adaptor for Computers without Serial Ports
2.17 CONFIGURATION
MENU:
Some features of the TDFM-7300 transceiver can be configured to the user’s preference.
To enter the configuration menu, turn the unit on while simultaneously pressing the F4,
ESW and TSW keys. Hold the keys until the display reads ‘Configuration Menu’. The
following menu items can be changed or modified. Rotate the knob to select the desired
condition and press the knob to continue to the next configuration item:
Knob default -
This will select which mode (volume or channel) the knob will be
when the radio is first turned on.
Vol / Chan mode -
When set to both, volume and channel functions are both available
while if set to single, only the function set in the above knob
default will be available.
Numlock mode -
When enabled, num lock mode is added to the available knob
functions.
Recall mode -
When enabled, recall is added to the available knob functions.
Band 1 channels -
This number should be set to the highest channel number
programmed in band 1 so that the channel scrolling wrap around
will work properly up and down.
Band 2 channels -
This number should be set to the highest channel number
programmed in band 2 so that the channel scrolling wrap around
will work properly up and down.
Band 3 channels -
This number should be set to the highest channel number
programmed in band 3 so that the channel scrolling wrap around
will work properly up and down.
Band 4 channels -
This number should be set to the highest channel number
programmed in band 4 so that the channel scrolling wrap around
will work properly up and down.
