TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300 Installation & Operating Instructions
TiL 08RE389 Rev A Issue 4
2-14
The following is a list of TDFM 7300 analog band CTCSS/PL TONES:
TONE # PL (HZ)
TONE # PL (HZ)
TONE # PL (HZ)
0 CSQ
11 97.4 22 141.3
1
67.0 12 100.0
23 146.2
2
71.9 13 103.5
24 151.4
3
74.4 14 107.2
25 156.7
4
77.0 15 110.9
26 162.2
5
79.7 16 114.8
27 167.9
6
82.5 17 118.8
28 173.8
7
85.4 18 123.0
29 179.9
8
88.5 19 127.3
30 186.2
9
91.5 20 131.8
31 192.8
10 94.8 21 136.5
32 203.5
TONE # PL (HZ)
TONE # PL (HZ)
TONE # PL (HZ)
33 33.0
44 56.8
55 199.5
34 35.4
45 58.8
56 206.5
35 36.6
46 63.0
57 210.7
36 37.9
47 69.4
58 218.1
37 39.6 48 150.0
59 225.7
38 44.4 49 165.5
60 229.1
39 47.5 50 171.3
61 233.6
40 49.2 51 177.3
62 241.8
41 51.2 52 183.5
63 250.3
42 53.0 53 189.9
64 CSQ
43
54.9
54
196.6
TABLE 2.3
TDFM 7300 Analog Band CTCSS/PL Codes
2.20 FLASH UPGRADE MODE
NOTE:
Flash upgrade mode only allows field upgrade for Bands 1 through 4. There is no
flash upgrade for Band 5.
On occasion it may be required to flash upgrade one or more of the RF modules in the radio
to change or add new features. This can be done using CPS software and a Motorola flash
upgrade kit. The transceiver must be put into flash upgrade mode by turning on the radio
while holding the HOME key. Select the band to be upgraded by pressing the band key.
Press the RESET soft key. Wait until the display shows Flash upgrade mode again. The
selected module is now ready to accept a flash upgrade. Follow the instruction supplied
with the flash upgrade kit for configuring and using the CPS. When flash upgrade is
completed, press the EXIT soft key to reboot the 7300 to normal operation. For detailed
instructions refer to TIL document 106517 “FLASH UPGRADE PROCEDURE FOR TDFM
6000/7000/7300 SERIES RADIOS”.
