TIGIEFFE AIRO A Series, Use And Maintenance Manual

Page: 50 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 50
5.2.5. User interface display (E)
The multifunction display for machine/user interface is used to display:
▪
the operation parameters of the machine during normal functioning or in the event of a fault;
▪
Working hours of Diesel engine (when Diesel power is selected the working hours are displayed in the format HOURS:
MINUTES and final letter D).
▪
Working hours of the emergency electric pump with continuous current (when 12V electrical power is selected the working
hours are displayed in the format HOURS:MINUTES and final letter M)
– OPTIONAL-;
▪ Working hours of the single-phase or three-phase work pump (when 220V or 380V electric power is selected – at platform-
the working hours are displayed in the format HOURS:MINUTES and final letter E) – OPTIONAL-;
▪
Battery charge level (only electrical models E).
The user interface display is also used during any interventions by specialized personnel to calibrate/adjust
the working parameters of the machine. This function is not available to the user.
5.2.6. Battery charger warning light (F)
Electric and dual-
powered models (“E”, “ED” and “EB”), equipped with a built -in high frequency battery charger, are provided
with this warning light indicating the operation of the battery charger (for more detailed information read the paragraph "Battery
charge”).
5.2.7. Enabled control panel warning light (G)
The green light is ON when the machine is turned ON and the ground control panel is enabled (the on/off key (C) should be
kept in “turret” pos ition).
5.2.8. Diesel engine warning lights (H, L, M, N)
These warning lights warn the user of any Diesel engine operational faults (models D and ED). One of these warning lights
turns ON when the motor is stopped. A “fault” message is sent to the operator on the platform (see paragraph “Platfo rm control
panel”)
Once the Diesel engine has stopped due to a problem signalled by one of these warning lights, the motor can no longer be re-
started until such problem has been solved.
5.2.9. Levers of movement of the platform (O, P, Q, R, S, T, U)
The various levers shown in the figure allow the platform to be operated. According to the various signs the corresponding
movements are activated. These controls can be operated only if the on-off key is set to ON down (ground control panel
selected). We shall also remind you that the ground controls are to be used to operate the platform only in emergency situations
and must not be used for any other purposes.
Use the ground controls only in emergency situations to allow the platform to be lowered.
IT IS FORBIDDEN to use the ground control panel as a workstation when personnel is on the platform.