TIGIEFFE AIRO A Series, Use And Maintenance Manual

Page: 56 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 56
5.5. Machine stop
5.5.1. Normal stop
In normal operating conditions:
▪
By releasing the controls the operation is stopped. Stop occurs within a time limit set in the factory, which guarantees
smooth braking.
▪
By releasing the dead-man pedal located on the platform, the operation is immediately stopped. In the event of an
immediate stop, braking is sudden.
5.5.2. Emergency stop
Should it be necessary, the operator may immediately stop all machine functions on both platform and ground control panel.
On the platform control panel:
▪ press the emergency stop button on the control panel and the machine is turned off.
▪
By releasing the dead-man pedal, the operation is immediately stopped. In the event of an immediate stop, braking is
sudden.
On the ground control panel:
▪
Press the emergency stop button and the machine (all models) and the heat engi ne (models “D”, “ED”, “EB”) are
stopped.
▪
Press the power emergency stop button (if available – “E” models), and the machi ne power (power circuit cut-out) is
cut-out.
To resume the operations is necessary:
On the platform control panel:
▪
Turn the emergency stop button of 1/4 turn clockwise.
On the ground control panel:
▪ Turn the emergency stop button of 1/4 turn clockwise.
▪ Pull the power circuit emergency stop button (if available) to the outside until it locks in position to power the machine
again.
5.5.3. Diesel engine stop
In order to stop the Diesel engine:
On the platform control panel:
▪ Turn the starter key antic lockwise to position “0”.
▪
Otherwise, press the emergency stop button.
On the ground control panel:
▪ Turn the starter key anticlockwise to position “0”.
▪ Otherwise, press the emergency stop button.
Do not stop the motor when the r.p.m. is high. Before stopping the motor wait until the r.p.m. is at the
lowest.
5.5.4. Stopping the 380V three-phase or 230V single-phase electrical pump (optional)
To stop the electrical pump (optional):
On the platform control panel:
▪
Press the stop button.
▪
Otherwise, press the emergency stop button.
On the ground control panel:
▪
Press the emergency stop button.