background image

Tiger Serve1 Assembly Guide                                                                                                                                                                                                                                  

2

© Copyright 2013 Tiger Technology. All rights reserved.

TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER TIGER TECHNOLOGY 
NOR ITS THIRD PARTY SUPPLIERS MAKE ANY OTHER WARRANTY OR 
CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT 
TO THE TIGER TECHNOLOGY PRODUCTS, AND SPECIFICALLY DISCLAIM THE 
IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, 
SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.

Limitations of Liability

To the extent allowed by local law, the remedies provided in this Warranty Statement 
are the customer's sole and exclusive remedies.

TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS 
SPECIFICALLY SET FORTH IN THIS WARRANTY STATEMENT, IN NO EVENT 
SHALL TIGER TECHNOLOGY OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR 
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, 
WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND 
WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Local Law

This Warranty Statement gives the customer specific legal rights. The customer may 
also have other rights that vary from state to state in the United States, from province 
to province in Canada, and from country to country elsewhere in the world.

To the extent that this Warranty Statement is inconsistent with local law, this 
Warranty Statement shall be deemed modified to be consistent with such local law. 
Under such local law, certain disclaimers and limitations of this Warranty Statement 
may not apply to the customer. For example, some states in the United States, as well 
as some governments outside the United States (including provinces in Canada), may:

Preclude the disclaimers and limitations in this Warranty Statement from limiting the 
statutory rights of a consumer (e.g.,the United Kingdom);

Otherwise restrict the ability of a manufacturer to enforce such disclaimers or 
limitations; or Grant the customer additional warranty rights, specify the duration of 
implied warranties which the manufacturer cannot disclaim, or not allow limitations 
on the duration of implied warranties.

FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND, THE 
TERMS IN THIS WARRANTY STATEMENT, EXCEPT TO THE EXTENT 
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE 
IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO 
THE SALE OF TIGER TECHNOLOGY PRODUCTS TO SUCH CUSTOMERS.

Tiger Technology reserves the right to revise and improve its products as it sees fit. 
This publication describes the state of this product at the time of its publication, and 
may not reflect the product at all times in the future.

THIRD-PARTY TRADEMARKS 

All other brand names, product names, or trademarks belong to their respective 
holders.

Manual Revision and Control

Title:

Tiger Serve1 Assembly Guide

Hardware model:

1.0

Date:

November 6, 2014

  Revision Record

Date

Description

Version

29/08/2014 Initial Draft

1.0

Summary of Contents for Serve1

















Reviews: