Tiger Serve1 Assembly Guide
Site Installation: Cabling Tiger Serve1
10
Important:
If you want to connect the appliance through the Fibre Channel ports
using multipathing, prior to connecting it, contact Tiger Technology support for
instructions.
The appliance can connect to client computers via 1GbE and/or 10GbE. When a client
computer is connected to the appliance via 10GbE (directly or using an Ethernet
switch), there’s no need to connect that computer through the Public port as well.
Additionally, Tiger Serve1 features an Admin port for connection to a computer, from
which to perform the initial setup of Tiger Serve1 (refer to Tiger Serve1 Administration
Guide).
To connect a computer to the Admin port:
1.
Plug one end of the network cable provided in the shipment in the Admin port.
2.
Plug other end of the network cable in the LAN port of the computer, from which
you want to perform the initial setup.
For details about performing the initial setup of Tiger Serve1, refer to Tiger Serve1
Administration Guide.
To connect Tiger Serve1 to the shared storage via FC:
1.
Remove the protective black cap from the Fibre Channel port.
2.
If your fibre optic cable has protective caps, remove them.