Tiger Serve1 Assembly Guide
Product Overview: Product Overview
3
Congratulations on your purchase of Tiger Serve1, Tiger Technology’s shared storage
manager. This manual describes how to install and connect Tiger Serve1 at your site -
from unpacking the appliance to powering on the system.
Before proceeding, make sure that you have read carefully all instructions, paying
special attention to the following symbols used in this guide:
SAFETY WARNING
IMPORTANT NOTE
TIP
You can find the most up-to-date version of this manual at the following address:
http://www.tiger-technology.com/products/tiger-series/tiger-serve1/
Product Overview
Tiger Serve1 is a state of the art, ready-to-deploy shared storage manager. Once
connected to the shared storage via Fibre Channel, the compact rack-mountable
appliance acts as a metadata controller to the shared storage volumes and lets SAN
Tiger Clients (connected to the storage via FC) and LAN Tiger Clients (connected to
the appliance via 1/10GbE) access the volumes concurrently, without risk of data
corruption, utilizing the optimum of their connection.
The appliance is shipped fully configured to you. To deploy Tiger Serve1 you should
simply:
1.
Rack-mount the appliance or install it on a table top (see “Installing Tiger Serve1”
on page 7).
2.
Connect the appliance to the shared storage and to client computers. (see “Cabling
Tiger Serve1” on page 9).
3.
Connect the appliance to the power source and turn it on (see “Connecting The
Appliance to The Power” on page 9).
Tiger Serve1 Features
•
1U, 19” rack-mount chassis.
•
8 Fibre Channel and/or 10GbE, and 1GbE ports for connection to the storage and
client computers.
•
Redundant power supply (a failed power module can be replaced while the system
is operating).
•
Tiger Technology software for shared storage management and diagnostics.
•
projectStore software for advanced project collaboration.
Package Content
The package you have received weighs approximately 32kg and has the following
dimensions:
It must contain the following:
•
1 x 1U, 19” rack-mount chassis.
•
1 x rack-mount rails kit:
•
2 x slide rails.
•
8 x screws for attaching the rails to the appliance.