Tiger Serve1 Assembly Guide
Site Installation: Site Installation
5
Rear View
The back of the appliance features the following elements:
•
2 x power supply modules.
•
System power button and system reset button.
•
depending on the configuration you have purchased:
•
8 Gb FC ports;
•
10 Gb Ethernet ports;
•
1 x Admin Ethernet port for initial setup of the appliance.
•
1 x Public Ethernet port for public and Internet communication.
Tiger Serve1 supports the following types of cables for connection to the shared
storage and client computers:
•
fibre optic or copper SFP (small form-factor pluggable) interconnect cables.
•
fibre optic or copper cables with SFP+ (Small Form-factor Pluggable enhanced)
connectors.
•
10/100/1000 Base-T cables with RG45 connectors at each end.
Site Installation
Unpacking Tiger Serve1
Important:
Do not throw away any of the packaging components, until you
ensure that the appliance works properly and there is no need to return any
part.
Tip:
It is advisable to keep all packaging components until the warranty of
your appliance expires.
1.
Cut the straps of the box, cut or remove the tape and open the flaps.