29
28
29
28
29
28
10
Cleaning and Maintenance
English
Parts to wash when dirty
Open/lock
button
Upper
casing
Heating plate
Power cord
Power plug
Center
sensor
Inside and outside the rice cooker
Wet a towel or cloth, wring out excess water, and wipe.
Center sensor
Remove burned rice and any other adhering grains of
rice.
If adhering objects are hard to remove, use commercially
available sandpaper (around #320), then wet a towel or
cloth, wring out excess water, and wipe.
Around the upper casing and open/lock button
Remove any adhering grains of rice, etc.
Note
●
Do not allow water to get inside the rice cooker unit.
●
Do not immerse the power cord in or splash it with
water. Doing so may result in short-circuiting or electric
shock.
Air inlet and air outlet
Air outlet
Air inlet
Remove dust using a cotton swab.
Note
●
Do not use the rice cooker if dust is adhering to the air
inlet or outlet.
Otherwise the temperature increases inside the rice
cooker, resulting in malfunction or fire.
Power cord and plug
Wipe with a dry cloth.
Removing and attaching the inner lid
Removing the inner lid
Push down and pull the inner lid levers to the front to
detach.
Inner lid
Do not pull the
inner lid gasket
Attaching the inner lid
Set the inner lid securely in the lid as shown in the
figure below.
(1) Set in place
(2) Set in place
Note
●
Do not pull the lid gasket.
Once it is detached, it cannot be reattached. If the lid gasket
is detached, contact the place of purchase.
Inner lid gasket
Inner lid
