3d
Explore endless creativity with the Tiger 3D
13
Engineering Mode
Test Module
Z-Motor
Cartridge
Cleaning Tank
Projector
Setting
Door lock
LED Current
Up
The Z-platform moves upwards.
Down
The Z-platform moves downwards.
Stop
The movement stops.
Up
The cartridge moves upwards.
Down
The cartridge moves downwards.
Stop
The movement stops.
Reset
The cartridge moves to default height.
Start
(1) Project a complete pattern to tank, the
residue will be transformed into a solid layer.
(2) Using the scrape, scoop up one side of
the layer. Then carefullylift to remove the
layer from the tank.
On
The projector turns on.
Off
The projector turns off.
Current
to 6A
Reset
Reset LED current to default
On
Door lock warning open.
Off
Door lock warning close.
LED
Change the current of optical engine,
range from 0.3A
Action
Verifying Correct Module Behavior
Advanced Setting
(1) Here you can set the actions of cartridge and picker. The setting will be saved as one motion
cycle, repeat for every layer.
(2) Start from action 1, choose object module first, and choose action item, and its step and
period. Keep adding new action item until one cycle is finished.
Object Module
Cartridge
Picker
Up
Max.2500
Down
Max.2500
Up
Max.2500
Down
Max.2500
1 Layer
1 Layer
Action
Step (5um/step)
Stay
NA
NA
Half step period
(micro second)
Min.800
