![background image](http://html.mh-extra.com/html/tiger/hd/hd_operators-manual_1114802015.webp)
3d
Explore endless creativity with the Tiger 3D
4.1 After finished printing
1) Lift the handle
(2) Remove the Picker and printed mode
(3) Use air gun and ethanol to clean the printed model
(4) Post curing (Additional post curing unit is required)
(5) Carefully remove the printed model from the picker.
Use putty knife to help separate the printed model and picker
.
(6) Do not expose the resin tank to direct light source because the resin will solidify under UV light.
Use tray to cover the resin tank to prevent solidify.
4.2 Cleaning Picker
Use putty knife or similar object to scrape away the excess
printed model on the picker. If any greasy residue persists,
use a soft cloth dipped in alcohol to rub the surface until the
grease is removed.
4.3 Cleaning the Resin Tank
(1) Unlock the resin tank from four corners.
(2) Pick up the resin tank and clean out resin
(3) Pick up the resin tank and pour resin
Do not fill exceed the top line, when refilling otherwise the resin will spill over when printing.
(4) Carry and install it onto the machine
15
4 After finished printing
Reminder :
- Do not shut down the power during curing
- Do not interrupt the firmware upgrade process. Any interruptions during the firmware upgrade process may cause your
printer to malfunction.
- Update the firmware frequently for better user experience