![background image](http://html.mh-extra.com/html/tiger/hd/hd_operators-manual_1114802007.webp)
3d
Explore endless creativity with the Tiger 3D
2 Setting up your 3D Printer - Hardware
2.1
Unpacking
WARNING
Do not attempt to unpack or move the Tiger3D without assistance.
Always use proper lifting techniques to avoid injury.
(1) Remove the top cardboard
(2) Remove the EPE surround the inner box
(3) Remove the side cardboard
(4) Remove the inner box
2.2
Connecting to the Power adapter and Cable
(1) Connect the power cord and adapter to your device, and then plug it into an electrical outlet
(2) Connect your printer with laptop
- Basic : Connect printer and laptop by RJ-45 cable (Graph1.) [ Initiating time 1 minute ]
- LAN : Connect both printer and laptop to local area network [ Initiating time a few seconds ]
- IP sharer : Connect both printer and laptop to IP sharer [ Initiating time a few seconds ]
7