ROUTINE MAINTENANCE
115
manufacturer, brand, and /or model name molding that is higher or deeper than the same molding
on the other sidewall of the tire or the outward facing sidewall of an asymmetrical tire that has a par-
ticular side that must always face outward when mounted on a vehicle.
Light truck (LT) tire
—A tire designated by its manufacturer as primarily intended for use on light-
weight trucks or multipurpose passenger vehicles.
Load rating
—
Th
e maximum load that a tire is rated to carry for a given in
fl
ation pressure.
Maximum load rating—
Th
e load rating for a tire at the maximum permissible in
fl
ation pressure for
that tire.
Maximum permissible in
fl
ation pressure
—
Th
e maximum cold in
fl
ation pressure to which a tire
may be in
fl
ated.
Maximum loaded vehicle weight
—
Th
e sum of curb weight, accessory weight, vehicle capacity
weight, and production options weight.
Measuring rim
—
Th
e rim on which a tire is
fi
tted for physical dimension requirements.
Non-pneumatic rim
—A mechanical device which, when a non-pneumatic tire assembly incorpo-
rates a wheel, supports the tire, and attaches, either integrally or separably, to the wheel center mem-
ber and upon which the tire is attached.
Non-pneumatic tire assembly
—A non-pneumatic tire, alone or in combination with a wheel or
wheel center member, which can be mounted on a vehicle.
Normal occupant weight
—
Th
is means 68 kilograms (150 lbs.) times the number of occupants spec-
i
fi
ed in the second column of Table I of 49 CFR 571.110.
Occupant distribution
—
Th
e distribution of occupants in a vehicle as speci
fi
ed in the third column
of Table I of 49 CFR 571.110.
Open splice
—Any parting at any junction of tread, sidewall, or innerliner that extends to cord ma-
terial.
Outer diameter
—
Th
e overall diameter of an in
fl
ated new tire.
Overall width
—
Th
e linear distance between the exteriors of the sidewalls of an in
fl
ated tire, includ-
ing elevations due to labeling, decorations, or protective bands or ribs.
Pin Weight
—
Th
e vertical trailer load supported by the king pin of a
fift
h wheel hitch.
Ply
—A layer of rubber-coated parallel cords.
Summary of Contents for Allegro Bus 2016
