Tiffin Motorhomes 2014 Phaeton, Owner'S Manual

Page: 76 / 150

Extending the Slide-Out Room
1. All windows in the slide-out room (Figure 8-2) must be closed
and secured before the slide-out room is to be extended or
retracted. Also any loose materials or possible obstructions
should be removed from the immediate, slide-out room area.
Make sure that the motor home has been leveled, that the
battery is fully charged and connected to the electrical system,
and that the ignition switch is “on” and the engine is running
before attempting to use the slide-out features.
2. Verify that there are no obstructions outside which may interfere
with the operation of the slide-out room.
3. Prior to moving the slide-out room in either direction, make sure that the driver’s chair is moved forward into
the driving area as far as possible and is locked into position.
4. Push the “out” section of the rocker switch; allow the slide-out room to go to its fully extended position.
5. Release the rocker switch (this locks the room into position).
Retracting the Slide-Out Room
1. Before attempting to move the motor home, the slide-out room must be fully retracted.
2. Verify that the 12 VDC system is fully charged and connected to the electrical system.
3. Push the “in” section of the rocker switch; allow the slide-out room to go to its fully retracted position.
4. Release the rocker switch (this locks the room into position).
Figure 8-2. Typical Slide-Out Fully Extended
Warning
Before attempting any extension of the slide-out room, check outside
and make sure that there is at least a five-foot clearance around the area
where the slide-out room will be extended.
TIFFIN MOTORHOMES –PHAETON® Chapter 8 SLIDE-OUT FEATURES
8-3