Tiffin Motorhomes 2014 Phaeton, Owner'S Manual

Page: 36 / 150

The 42LH Phaeton will offer an optional All Electric option that will contain a two-burner induction cook top.
NOTE: The two-burner induction cook top requires 50 amp service or the generator to operate!
Your two-burner induction cook top surface is developed to be easy to use. The cook top can endure plenty of wear
and tear if proper care is taken to clean and operate the cook top as directed. The flat surface allows for easy
movement of pots and pans safely with almost no risk of spills or overturning.
Please note that you must use pots
and pans that are rated for use with an induction cook top for proper results.
On the right hand side of the cook top the control panel is featured. ON/OFF refers to the appliance power, while
HEATING/TEMP and TIMER refer to specific functions listed below:
HEATING —this is the default function of the induction cook top. When pressing ON/OFF, the heating light will
illuminate and the cook top will heat the cookware at 1200W. The heat can be adjusted by touching the “up” or
“down” arrows. There are ten levels of power, with 10 being the highest.
TEMPERATURE —when pressing TEMP, the induction cook top will begin setting the temperature and the TEMP light
will illuminate. The default temperature is 248º (120ºC). Temperature can be adjusted by touching the “up” or
“down” button. Note that the temperature range is 140º to 464º (60ºC to 240ºC).
TIMER —when pressing TIMER, the light of the TIMER and one of the lights on HEATING/TEMP will illuminate
accordingly. The cook top will enter the Time Setting mode. Five seconds after setting, the window will automatically
shift to the mode display of the corresponding function. To view the countdown time, press TIMER again. The display
window will show you the remaining time.
TELEVISION SYSTEM OPERATION
Television Antenna
You can automatically search for channels that are active in your area by editing and scanning channels on your
remote control. To do this you will need to:
• Press the power button to turn TV on
• Press Menu
• Go to Setup, press “OK”
• Go to Ant/Cable Setup, press “OK”
• Make sure ANT IN is on Antenna to program Antenna or on Cable to program cable
• Then press “OK” on all channels
• When scanning is complete, press “OK”
NOTE: The booster must be on for ANT (green light will appear) and off for the cable. The booster
is located in the front, right cabinet of your unit.
4-6
TIFFIN MOTORHOMES –PHAETON® Chapter 4 MAJOR APPLIANCES & ACCESSORIES