manualshive.com logo in svg

Tiffen Steadicam M-2, System Manual, Page: 54 / 54

Share
Download
Tiffen Steadicam M-2 System Manual Download Page 54

The Tiffen Company

90 Oser Avenue
Hauppauge, NY 11788

Phone: 

(631) 273-2500 or 1(800) 645-2522

Fax: 

(631) 273-2557

Tiffen-Steadicam

2815 Winona Avenue
Burbank, CA 91504

Phone: 

(818) 843-4600 or 1(800) 593-3331

Fax:

 (818) 843-8321

Tiffen International Ltd.

Pinewood Studios
Pinewood Road
Iver Heath SL0 0NH
United Kingdom

Phone: 

+44 (0) 1753 783 960

Email:

[email protected]

Web:

Tiffen.com/steadicam

Warranty:

Tiffen.com/warranty

Designed and manufactured in the United States of America.

Tiffen reserves the right to change specifications, accessories, etc. without prior notice.

There is no implied or expressed warranty regarding this material.

STEADICAM

®

, Steadicam M-1™, Steadicam M-2™, and Steadicam Volt™ are trademarks of the Tiffen Company, LLC. All other 

trademarks and product names appearing herein are the property of their respective owners.

LIT-888000, RevA © 10/2019 Tiffen Company, LLC. Created by E. Barthelman

Contact Tiffen

Summary of Contents for Steadicam M-2























































Reviews:

No comments